CR1632 battery

　　What should you pay attention to when using CR1632 battery? What are the misunderstandings?

　　The forklift battery should be kept dry to protect the outer box insulation and corrosion. The battery unit should be replaced by professionals. When used in winter, uninterrupted use of the starter should be avoided, and corrosion outside the pole terminals should be dealt with in a timely manner. , the following is a detailed introduction to "precautions and misunderstandings when using CR1632 battery".

　　1. Precautions for CR1632 battery

　　1. The battery should be kept clean and dry to avoid leakage current.

　　2. If there is liquid in the battery box, it must be sucked out immediately with a straw

　　3. If the internal and external paint of the battery is found to be damaged, it should be repaired immediately to protect the insulation of the outer box from corrosion.

　　4. If it is found that the battery unit needs to be replaced, it should be done by professionals.

　　2. Misunderstandings about the use of CR1632 battery

　　1. When using the battery to start in winter, continuous use of the starter will cause the battery to be damaged due to excessive discharge.

　　2. If there is corrosion on the surface of the battery pole terminals, there is no need to deal with it, as long as it is not loose. Corrosion appears on the outside, and corrosion will also appear on the inner surface of the terminal, causing the resistance value to increase and affecting the normal charging and discharging of the battery. It must be dealt with in time.

　　3. When using maintenance-free batteries, simply think that maintenance-free means that no maintenance is required.

　　4. If the density of the electrolyte is not checked and adjusted, especially when winter comes, it will cause insufficient battery capacity and even cause the electrolyte to freeze.

　　5. When the liquid level is low, replenish the electrolyte or add pure water instead of the required distilled water. If electrolyte containing sulfuric acid is added, the concentration of the electrolyte inside the battery will increase, and phenomena such as boiling and acid mist may occur, seriously affecting the service life of the battery. Use drinking purified water instead of distilled water, as purified water contains various trace amounts of inorganic substances. , has a negative impact on the battery.

Read recommendations:

LR20

What are the factors that affect the performance of lithium battery.portable energy storage battery

What are the technical requirements for lithium iron phosphate battery packs?Nickel Hydride No. 5 ba

AA Ni-MH battery Manufacturing

3.7v 18650 battery pack