LR03 alkaline battery

Soft-pack lithium battery thickness measurement technology solution

Soft lithium-ion battery thickness measurement technology method: It is recommended to use Dacheng precision 2D offline laser thickness gauge

Now lithium-ion batteries are mainly divided into three categories: square, cylindrical, and soft-pack. Among them, square and cylindrical shells are mainly used for aluminum alloy, stainless steel and other hard shells. The soft-pack aluminum plastic film used in the shell is their essential difference. As shown in Table 1, the important advantages of soft-pack lithium-ion batteries include:

(1) Good safety performance: Soft film batteries have less electrolyte leakage. In the case of safety hazards, soft film batteries will burst instead of hard shell batteries bursting due to internal pressure;

(2) Light weight: Soft-pack batteries are 40% lighter than square batteries of the same capacity and 20% lighter than aluminum shell square batteries;

(3) Large battery capacity: Soft packaging can save 20% of volume, which is 50% higher than steel shell batteries of the same size and 20-30% higher than aluminum shell batteries.

Unmanned boat intelligent lithium battery is IP67 waterproof, with separate charging and discharging ports, safe and reliable

Nominal voltage: 28.8V Nominal capacity: 34.3Ah Battery size: (92.75±0.5)* (211±0.3)* (281±0.3)mm Application areas: exploration and mapping, unmanned equipment

Click for details

1) Soft-pack batteries are more suitable for portable, space-intensive or thickness-based applications, such as 3C consumer electronics;

2) Although square batteries have high single capacity, they are large in size and weight, while soft-pack batteries have obvious advantages in energy density. In addition, single cells are currently developing in the direction of large capacity and high rate, which will be more in line with the needs of mobile power supplies in categories such as new energy vehicles.

3) Although cylindrical battery production technology is complex and has significant advantages in energy density, due to the small capacity of single cells, more batteries are required for the same battery pack capacity range. For example, the battery pack capacity of Tesla Model S is 85 kWh, which has about more than 7000 18650 cylindrical batteries. The requirements for battery management system (BMS) are very high, while the single cell capacity soft pack value is more than 10 18650 cylindrical batteries, and the requirements for BMS are relatively low. Considering the limited carrying capacity of most BMS in my country and even in the world, large-capacity battery packs will not use too many cylindrical batteries. In addition, cylindrical batteries often explode due to their high energy density, poor safety, and high internal pressure caused by hard shells, while LR03 alkaline battery have obvious advantages.

my country's mainstream electric vehicle companies are now accelerating the use of LR03 alkaline battery. Passenger car companies such as BAIC and SAIC have begun to try to use LR03 alkaline battery, and Wanxiang A123 and voneng technologies have occupied the mainstream of LR03 alkaline battery. At the same time, domestic three-dimensional soft pack technology has made significant progress and greatly improved energy density. Soft Under the trend of soft packs, power lithium battery companies should seize the opportunity and increase the production of soft packs.

Faced with huge market temptations, domestic companies have also laid out complex lithium-ion battery soft pack business. From January to May 2018, the installed capacity of power lithium batteries nationwide was 1.266 billion kWh, up 247.80% year-on-year. During the period, the installed capacity of soft-pack power lithium batteries reached 1.43Gwh, up 71.98% year-on-year. The market share reached 11%, down 12 percentage points year-on-year from January to May. The important reason is that in the first five months of this year, In the first month, the installed capacity of CATL and BYD increased rapidly, the market share of square batteries increased, while that of soft-pack and cylindrical batteries decreased. It is predicted that with the increase in the saturation rate of soft-pack, the demand for lithium-ion batteries will increase. By 2020, the saturation rate of soft-pack will reach about 41%, and the demand for soft-pack batteries will reach 59GWh and GAGR35%.

Soft-pack batteries generally have three edges, and the heat sealer is used to adjust the appropriate temperature, strength, time and other parameters to ensure the edge sealing effect. The edge sealing quality is directly focused on

Read recommendations:

Li-ion 18650 3500mAh 3.7V

Battery maintenance.703048 polymer battery

Protection Measures for Spontaneous Combustion of Lithium Batteries

602248 battery Manufacturing

18650 battery pack direct sales