CR927 battery

How to maintain electric CR927 battery

After using the electric forklift for a period of time, the overall feeling is that the power is not as strong as before, and the time is not as long as before. The battery can work continuously for 10 hours, but now it can only work for 4 hours.

Check the specific gravity of the battery: Use a suction hydrometer to check the specific gravity. Do not let the electrolyte splash out during operation, and wear protective equipment.

Treatment of waste batteries from forklift battery manufacturers: For waste batteries, extract the electrolyte and disassemble the battery.

It is negotiable whether the battery manufacturer will recycle it. Operation of end-of-life batteries from forklift battery manufacturers: When the battery is close to the end of its life, the electrolyte in the single cell battery decreases very quickly, and distilled water should be added every day. These phenomena are caused by the lack of battery maintenance by forklift operators.

During the charging and discharging process, due to electrolysis and evaporation, the water content in the electrolyte will gradually decrease, causing the electrolyte level to drop. If it is not replenished in time, the service life of the forklift battery may be shortened. The water used to replenish the battery of an electric forklift should be distilled water. You cannot use purified water instead of distilled water for drinking just because it is cheap. After all, purified water contains a variety of trace elements, which will have adverse effects on CR927 battery.

Sometimes, when the forklift cannot be started, many people may think that it is caused by insufficient power storage and electric transport vehicles. They often add electrolyte to the battery, which has the opposite effect and greatly shortens the battery's network life. For the normal operation of the battery of an electric forklift, you can only choose to replenish water, and never add electrolyte! If an electric forklift battery falls over and the electrolyte flows out, resulting in product loss, the electrolyte can be replenished. The electrolyte of the electric forklift needs to be effectively replenished according to the original electrolyte density.

Operators usually only need to gently open the small battery cover to see if the battery cover is dry or whether the water reaches the warning line position to determine whether the battery needs to be added with water. In addition, the battery panel is wrapped with white fiberglass cotton, which should be wet under normal circumstances.

Read recommendations:

Ni-MH AA1200mAh 1.2Va

pack process analysis of 18,650 lithium battery

CR1225 battery.Introduction and Development Status of Lithium Carbonate

41v battery pack lithium ion Factory

18650 li ion battery